IBL 500 - Automatic digital slice scanning system

【Product name】：Automatic digital slice scanning system

【Product model】：IBL 500 - Automatic digital slice scanning system

【Name of the registrant/manufacturer】：Suzhou Bingli Technology Co., LTD

【Production adress】：Room 507, North Building, No. 689 Binhe Road, High-tech Zone, Suzhou

【Service life】：seven years

【Date of manual preparation or revision】： March 2020

【Device performance】 

IBL 500 series fully automatic digital slice scanning system takes advantage of multiaxial high precision automatic control system, through the micro optical imaging and digital image acquisition, free movement and collection of load stage slices, scanning and stitching into the whole digital slice by  the software system,using computer monitors can browse all vision digital slices. This process is an automatic process, which can be loaded with 240 slices on the basket at the same time for automatic loading and unloading and uninterrupted slice scanning. The scanned image is directly stored in the computer, and can be observed and read through the display. And can realize any multiple zoom out, add annotation, screenshot and other functions. 

1. Product appearance 

1) The scanning system has a clean appearance and no scratches, bumps, edges and burrs. 

2) All kinds of text marks on the outer surface of the scanning system are clear, accurate and firm.

3)  Scanning system fastenersare firmly installed, and the switch keys are flexible and reliable.

2. Performance index

2.1. Moving repeated positioning accuracy:

The repeatable positioning accuracy of X, Y and Z of the scanning system is less than 0.01mm.

2.2. i  maging quality

The imaging of the scanning system should meet the standards of clear image, clear cell or tissue structure, and easy identification.There shall be no stitching dislocation, image deformation and other defects.

2.3. Scanning Resolution (mm/pixel)

The scan resolution is 0.000345mm/pixel at 20x scanning magnification, and the error is ±15%;
The scan resolution is 0.000172mm/pixel at 40x scanning magnification, and the error is ±15%. 

2.4. Scanning speed (The unified scanning speed is the time to complete scanning of the 15*15mm area)
20x scanning magnification, ≤35s in fast scan mode
40x scanning magnification, ≤ 40S in fast scanning mode

2.5. Scan range
24.6mm*45mm, the error is ±10%

3. Product structure

This series of products consist with the system host, power cord, supporting software . The 

basic specifications are as follows:

（Table two）

4. Scope of application

This product is suitable for digitization and observation of pathological and biological tissue sections.

5. Work Requirements 

5.1. Environmental Conditions:

1) Indoor use

2) Altitude not exceeding 2000m 

3) Ambient temperature: 5°C~40°C

4) When the temperature is lower than 31°C, the maximum relative humidity is 80%, and when the temperature is 40°C, the relative humidity linearly decreases to 50%

5) Instantaneous overvoltage category: class ⅱ

6) Rated pollution level: Level 2

5.2 Power supply conditions

1) Voltage ~220V; Frequency 50 hz

2) Input power : 2000VA 

5.3.Description of input and output identifiers

1) Power supply parameters

2) Fuse parameters

3) USB3.0 connecting line

4) USB3.0 connecting line

5)CONTEC motion control line

6)CONTEC motion control line

6. Operating environment

Digital slice scanner software processing system is a set of software to realize the comprehensive control and application of slice digitization process, integrated mechanical control, image acquisition, scanning matching, to achieve high-speed, high quality, fully automated slice digitization process. The module has reasonable structure, complete function, open interface, simple and convenient operation. This software is based on Windows system software, can support Windows10 and other platforms.

CPU: Intel i7 processor 2.5GHz or higher 

Memory: 16 gb or higher hard disk: 1TB or higher 

Operating system: Windows10 64-bit system

7. Network security

1) Data interface: the device realizes data transmission through USB interface;

2) User access control: There is only one administrator account. The user can successfully log in with the correct user name and login password to realize the access control rights of the software and identify the user, and can scan, browse, change the password and other operations.

Initial account: admin;

The initial password is IBL12345.

Click Change Password to change the initial password.

8. Product identification

1) The product shell is pasted with the product nameplate, the content of which is as follows:

2) Product name: Digital slice scanner

3) Specifications and models: IBL 500

4) Rated voltage: ~220V

5) Frequency: 50Hz 

6) Power: 2000VA